
Products
Low Speed Flat Return Tracker
About
Low Speed Flat Return Tracker
Tru-Trac® Flat Low Speed Trackers are specifically designed for low speed conveyors running at 1m/s or slower. Activation guide rolls have been incorporated into the design to speed up the activation of the Tru-Trac Tracker.

Main Features
- Reliable Performance – The Tru-Trac® Tracker has proven itself to be robust, reliable, long lasting and provide effective performance in all conditions.
- Bearings – Standard Roller Bearing configuration available.
- Maintenance Free – Sealed bearings do not require any greasing.
- Lagging – Covered with High Abrasive Natural Rubber, Polyurethane or Fire Retardant lagging.
- Improved Sealing System – End caps are pressed into the bearing housings, these also function as a ‘flinger’ seal to prevent ingress of material.
- Operates in all conditions – Quick activation on both wet and dry belts, both above and below ground.
- Versatile Installation – Can be installed on the clean side of the belt, and then tension can be adjusted easily with the supplied mounting brackets.
- Performance – Excellent and reliable performance on low speed conveyors.
- No belt edge damage – The design ensures that no 90º contact with belt-edge occurs. As the belt moves off-centre the belt slides up the guide roll and causes the tracker to activate quicker.
- Pipe Structure brackets also available
Available from 450mm – 1200mm
More Information
Media
Video
Technical Specs
Install Guides
Brochures
Gallery
Video
Technical Specs
Install Guides
Brochures
Gallery